Imagine a scenario where a network engineer configures a new VLAN on a VTP Server switch and let’s look at how VTP behaves in this scenario. An assumption made here is there are no switches in VTP Transparent mode in our network. Continue reading Cisco VLAN Trunking Protocol Walk-through
VLAN Trunking Protocol (VTP) is a technology that allows us to create, delete or modify VLAN’s in one switch and then have that change propagated throughout the switches in the same VTP domain. VTP advertisements that carry this information are only sent on trunk links. Continue reading Introduction To VLAN Trunking Protocol (VTP)
In this guide, we are going to look at how to load an IOS to a Cisco Router using the tftpdnld ROMmon command recovery procedure with a TFTP server at the 192.168.1.105 address, a 255.255.255.0 subnet mask, and a filename of c3845-adventerprisek9-mz.151-4.M10_2.bin. For those of you who are not familiar with the ROMmon, this is the program a Cisco device will boot in to when there is no IOS in the flash drive.
Welcome to ippacket.com.au for another lesson on Cisco switches. In this lesson, we are going to upgrade the IOS of a Cisco Catalyst 2960 switch. The steps are as follows. Continue reading Procedure for Upgrading Cisco Catalyst 2960 Switch IOS